Coating Thickness Probes

IS9560, IS9507+

For accurate results with formed cans, narrow tubes and aerosols

Innosen’s range of probes to accompany Sencon’s SI9600 Coating Thickness Gauge are designed for maximum ease of use and accuracy of results with flat sheets, formed cans, narrow tubes and aerosols.

If coating weight measurements suffer from a degree of variation, you have to err on the safe side when applying coatings in order to be sure that target weights are met.

Therefore a percentage of unnecessary coating is always being applied. With reliable measurements from Innosen’s coating thickness probes, the coating process can be brought under tighter control. Even a small reduction in coatings usage will quickly deliver a return on investment, saving money and raw materials.

PRODUCTS

FORMED TUBE/AEROSOL PROBE​
IS9650

The IS9560 is used with Sencon’s SI9600 Coating Thickness Gauge to measure the internal and external coating thickness on aerosols or long tubes with very small diameters. Instead of having to cut the tubes open and use the time consuming weigh-strip-weigh method, you can obtain instant results about coating distribution inside formed tubes and aerosols in a non-destructive and repeatable way with world-class R&R.

 

  • Thin carbon fibre arms that will go into the tube and remain rigid for precise placement.
  • Very small measurement surfaces to cope with the radial curvature of narrow tubes.
  • High precision electronics to process the very small signals involved.
  • A deadweight balance to apply the probe tips with careful but consistent pressure onto delicate tube walls.
IS9560 with probe

Extra small probe heads on the Formed Tube / Aerosol Probe are designed to fit into tubes from 13.5 mm diameter and up to 220 mm long (internal sizes).

NOTE: Due to the small measurement surfaces and the smaller signals involved, the Tube/Aerosol Probe must be used with a modified Sencon SI9600 Coating Thickness Gauge. Contact Innosen for details.

 

FORMED CAN PROBE
IS9507+

The Formed Can Probe is used with Sencon’s SI9600 Coating Thickness Gauge to test internal and external coating thickness on formed cans. The scissor action jaws are opened manually against spring pressure. Guide rings along the probe arms help the operator to move the can to the correct positions for testing. When the jaws are released, the spring release action applies a consistent and known pressure for each test, avoiding the risk of operator variability and ensuring accurate and repeatable readings.

    SI9507

    Related Products

    SI9600 Coating Thickness Gauge

    Coating Thickness Gauge SI9600

    The coating thickness gauge rapidly and accurately measures the coating thickness/film weight.

    Hoverprobe IS9650

    Hoverprobe IS9650

    Test coating thickness on flat sheets with world class R&R.

    OFFICES

    Spain
    Romà Piera i Arcal, 8
    08330 Premià de Mar (Barcelona)
    Spain
    Main Multilanguage Tel:
    +34 937 549 526
    Alternative Direct Tel:
    English: +44 1905 887845
    Email: [email protected]

    Hong Kong
    11th Floor Dah Sing Life Building
    99 Des Voeux Road Central
    Hong Kong
    Tel: +852 2127 0699

    Philippines
    808 Citystate Centre Building
    709 Shaw Boulevard
    1600 Pasig City
    Philippines
    Tel: +63 2 8696 6965 /
    +63 2 8696 6978

    USA
    7691 N.Overland Trail
    80524 Fort Collins
    Colorado
    USA
    Tel: +1 970 305 8721

    © 2021 Innosen. All rights reserved.