COIL TRANSLATION MEASUREMENT SYSTEM
IS1270
MEASURES SIDEWAYS MOVEMENT OF THE COIL TO AVOID CLIPPED CURLS
The IS270 Coil Translation Measurement System monitors and measures the coil’s edge position as it goes through the cutting line.
This is beneficial to the coil cutting line because any lateral drift or even very small misalignment of the scroll edge will eventually result in clipped curls.
This is especially important for scroll sheets used to make ends as it ensures no clipped curls will be present when ends are stamped out.
BENEFITS
✅ Prevent clipped curls by measuring coil translation on the cutting line
✅ Avoid various problems down the line (e.g. damaged gauging roll or fixed guide, length variations)
✅ Reduce spoilage
✅ Easily identify unacceptable variations in coil width during a run
✅ Improve side guides when a new coil is loaded
FEATURES
✅ Instant warning about sideways movement of the coil beyond tight preset limits
✅ Can be used for re-calibration of the fixed guide to compensate for wearing down of the gauging rolls
✅ Thin vertical sensor body to allow easy mounting
✅ Live on-screen info of coil translation during inspection
✅ Calculates values for the average and the standard deviation
✅ RS232 output of translation measurement data
✅ Quick alignment feature of IS1270 Head using a button and two small lamps placed locally on the head
✅ Suitable for mounting on either side of the line
✅ Multilingual: French, Italian, German, Spanish, and English
Specifications | |
|---|---|
| System components: | Inspector Head, Controller with LCD screen |
| Dimension: | Head: 230mm (9.05”)x 40mm (1.57”) x100mm (3.93”) Controller: 139 (5.47”) x 66mm (2.6”) x 71mm ( 2.8”) |
| Range of Translation Measurement: | ±5mm (±0.20”) |
| Accuracy: | ±0.08mm (±3 thou.) | 350m/min. |
| Line Speed: | 9000 sheets/ hour |
| Sample frequency: | 4 readings per second |
| Installation/Where to put: | Unloader/uncoiler; over the edge of the coil just before the shears as part of the fixed guide assembly |
| Calibration: | Automatically calibrated after alignment is finished |
| Environmental Protection Rating: | IP54 |
| IS270 Coil Translation Measurement System Part Number: | Head: 212-45540-98 Controller: 212-45520-98 |
Related Products
On-line Sheet Measurement System
Detects sheets that are cute beyond length…
Sheet Translation Measurement System
Detects skewed or rotated sheets to avoid leading…
Sheet Skew Measurement System
Detects skewed or rotated sheets to avoid leading…
Sheet Registration Measurement System
Counts the timing of sheets’ registration to avoid…
OFFICES
Spain
Romà Piera i Arcal, 8
08330 Premià de Mar (Barcelona)
Spain
Main Multilanguage Tel:
+34 937 549 526
Alternative Direct Tel:
English: +44 1905 887845
Email: [email protected]
Hong Kong
11th Floor Dah Sing Life Building
99 Des Voeux Road Central
Hong Kong
Tel: +852 2127 0699
Philippines
808 Citystate Centre Building
709 Shaw Boulevard
1600 Pasig City
Philippines
Tel: +63 2 8696 6965 /
+63 2 8696 6978
USA
7691 N.Overland Trail
80524 Fort Collins
Colorado
USA
Tel: +1 970 305 8721